Poke, string, knot, glue = DIY Fabric Beads! PART 2

Last week I blogged about how I painted and made some of my very own fabric beads (and was thrilled with the response the post got, too!). But painting and glueing was only the half of it! Once I started making the beads, I was unstoppable and kept finding new and different ways to use fabric already on hand and unconventional items from the craft store!


After painting my own beads, I started looking through my fabric vault (aka big ole' tupperware storage bin) to see what else I could come up with. Though I had purchased some super rad polka-dot Amy Butler fabric back in LA in order to make a pillow, I figured I could sacrifice a little bit for the cause. After cutting the fabric down to 1x3" strips, I needed a new venue on which to plaster the fabric (in other words - a cheap form of a bead)! After searching up and down the aisles of Michael's, I think I found the perfect (and cheap!) solution: Styrofoam Balls!


So with my styfoam balls in hand and fabric Mod Podge ready to go, I just now needed a way to make the hole and hold the bead while putting on the fabric. Of course - chopsticks!

I first glued a strip around the bead long ways:

Then finished with two more strips that went diagonally along the holes on either side. And Voila! A bead!

After pairing them with some more fabric-wrapped ugly disco ball beads and some brown wooden beads, I topped the necklace off with some pink ribbon and had this:

Amy Butler Fabric and Wooden Beaded necklace with Pink Ribbon, $20 

But what's a necklace without a matching bracelet, no?

Amy Butler "Love" Polka Dot Fabric Bracelet, $10

I might just keep this one. 

And of course I didn't stop there (and in fact, I hope to make many more of these items... I love 'em)! I was also determined to make something with this random piece of scarf-like fabric I bought for $.50 in LA awhile back:

After cutting a piece of fabric that measured about 3"x1", I got my styrofoam balls back out and went at it: 

And knotted and wrapped the fabric around the balls:

And came up with this thing-a-ma-bobber:

I will admit, the turnout of this necklace is now exactly what I had hoped for. It's quite stiff and down's hang all that nicely at the bust. My fabric was too wide and not long enough - I would have liked to make more knots and added more beads but ran out of length, plus I don't like how much fabric hangs from the sides. It's for all these reasons why this item isn't on Etsy yet - I am not 100% behind it. I do, however, plan to show it as an example at my jewelry party in a few weeks and see what kind of feedback I get on it and go from there. Though I love Etsy, using the internet to sell certain kinds of jewelry takes away the touch and feel dimension that is often so crucial to a good purchase!


Then I figured - if I could use fabric, why not use ribbon, too? After looking through my ribbon stash, I found this rad yarn-like stuff and paired it with some wooden-disc beads that I salvaged from an Anthropologie necklace I bought on sale years ago:

(Needless to say, I totally ruined my manicure with all my glue-use!)

Which resulted in these (the one on the right is actually made of fabric I painted blue):

And then this:

Again, I didn't put this item on Etsy yet because I am not totally settled with it. Maybe I am waiting for a perfect component piece to come my way. Maybe I am waiting for a better idea for their final use. Maybe I am just too stubborn to list them yet! This will be another item that will debut at the jewelry party in hopes of some constructive criticism. Ah, and artist's work is never done. 


Next up - how I used random stuff found at Goodwill to create one-of-a-kind jewelry displays for the party! Keep posted :)

Paint, Stamp, Cut, Glue, Wrap = DIY Fabric Beads! PART 1

I love beads. And I love fashion. Which means I love fabric. I also love painting. And I really love Mod Podge. I am not sure why it took me so long to put it all together. I present to you - FABRIC BEADS!

In attempt to make the most unique, and most Bead Up-worthy beads out there, I figured I would start with painting/stamping my own fabric. I started with very plain, white cotton fabric and used one of my scrapbook stamps with Chinese characters on it and stamped away (I was going for the newspaper print look):

Then I painted half of the white fabric with some very bright lime green fabric paint and stamped away there, too (and let me tell ya, that stamp with all it's individual grooves was a *&^%$ to clean!):

And while I had the fabric and all, I needed somewhere to glue it all on! Though I could technically wrap the fabric around a form (like a straw, for example) and glue the heck out of it,  I knew such a method wouldn't produce a big and bold look I was going for. After searching all around Michael's, I finally spotted some big ole' wooden round beads in the wooden doll section. I also found exactly what I hoped would exist but wasn't sure it did: Fabric Mod Podge!

Next, I cut the green fabric in small pieces and glued the back of each strip:

And slowly but surely I came up with this:

Since I only had 4 of the big wooden beads, I needed another form of sorts to wrap the bead around. Rather than running back to the store, I remembered this semi-ugly set of beads from a torn-up plastic necklace I bought at the Studio Sale at Warner Brothers last year (which I have used in a piece before):

And after wrapping and gluing the fabric around the plastic and the wooden beads, I had these:

Which lead to this:

Chinese fabric, Cinnabar, Coral, and Agate Necklace, $25

And this:

Chinese Fabric, Cinnabar, and Agate Necklace, $30

And this: 

Chinese Cinnabar and Fabric Hanzi Bracelet, $16

And I totally didn't stop there. In fact, I made all kind of additional fabric necklaces and beads... but you'll just have to wait until the next post to see 'em (or you can check out my Etsy shop and take a peek in the meantime)!

When Fabric gets in the mix...

Lately I have been a bit obsessed with textiles. First I have been a little more vicious in incorporating fabric in my jewelry, as seen in this week's new products:

Golden Bohemian Wooden and Fabric necklace, $17

White crystal with blue ribbon and silver broach necklace, $19

Green Gemstone, Wooden Beads, and Purple Ribbon necklace, $23

Party in Pink Faux Pearl and Pink Ribbon necklace, $12

Disco brown ball and lime green necklace, $17

Wooden Beads and Purple Ribbon necklace, $20

And my favorite, this little tulle necklace inspired by some random socialite I saw online

(more on that later this month):

Gold netting and purple pearls necklace, $19

In fact, you can count on more fabric jewelry coming your way - I just signed up for a FABRIC BEAD-MAKING class at the Art Institute here in town and can't wait! (In fact, can I just start my life over and be a professional art student - man all the classes that are offered are SO tempting!). 
Meanwhile, I have been working with the fabric I bought in the garment district in LA, starting with some much-needed curtains for my craft room. I didn't really go into the project with a plan, but one day I was rummaging through my random fabric collection and was reminded of a very random piece of long remnant fabric I bought at a $1/pound store:

Amy Butler "Woodfern Kakhi," though I found it for a ridiculously cheap $.75, you can also find it here on Etsy :)

The fabric was basically being asked to be transformed into curtains - it was literally 5" long and about a 2" wide! I simply folded the fabric long ways, cut it in half, and skipped the sewing machine all together and just pinned the top over on itself to make a little loop for the curtain rod. Voila!

But I had this little lowly piece left:

Which I of course didn't want to go to waste. I had just the solution - a wrist pincushion! Thing was, I had no clue how to make such a thing. Here goes nothing...!

I knew I needed a base so as to prevent the pins from hitting my wrist when worn. The base would also function as the shape for the thing. So I started glue-sticking the fabric on the cardboard...

Then sewed it on to double reinforce it...

And then crammed some stuffing that was left over from my previous pillow project and sewed it shut...

Next was the wrist strap... I used some trim from some other Amy Butler fabric that will be used in a future pillow project (as seen here). First I turned it inside out and sewed it down the side...

Turning it back inside out was the hardest part since it was so thin, and once I figured it out, sewing the fabric together with a stretched elastic piece inside was even harder. Man, I have a WHOLE new respect for those scrunchies that were OH SO popular in the 80's! 

Next I sewed the wrist band to the stuffed topper thing...

And had me a brand new pincushion wristlet!

On that note, if you dig fabric crafts, do check out my friend Linsday's new Etsy shop and her GIVEAWAY with Etsy It Up! Let's wish her well, y'all!